Dynamic Hydrofab is embraced with proficiency and has ascertained itself as a coveted association in the field of fabricating and delivering an extensive range of best quality compact power packs. These products are manufactured by making use of finer quality raw material. This superior raw material is obtained from the trusted, well-known and responsible merchants existing in the market currently. At Dynamic Hydrofab, manufacturing process of compact powers packs takes place under the strict supervision of experienced and skilled engineers who are working hard endlessly to satisfy the customer requirements. All standards and guidelines laid by the industries are sternly followed while manufacturing the compact power packs.
The power packs manufactured by us are packed together efficiently and hence are compact. These consist of mostly inbuilt valves and use automotive batteries for power requirements. Hydraulic fluid employed in these compact power packs involves the use of oil with a viscosity ranging from 6 centistokes to 400 centistokes provided that the working temperature is stable. The required voltage is between 12 volts to 24 volts and flow should lie between 1cc to 3cc. The usual working pressure is almost 180 bar but there is a possibility to increase the same whenever needed.
Dynamic Hydrofab is considered as one of the leading manufacturer/supplier of Compact DC Power Packs. These power packs are vary compact in size and most of valves are inbuilt,
Compact Power Pack are normally used for small span of operation Generally, they can be used for max 2-3 minutes of operation at full Load and Max 4-5 Minutes operation at 30% of Full Load
Basic & Major Components
- * Electric Motor (AC or DC)
- * Coupling
- * Hydraulic Gear Pump
- * Center Manifold Block
- * Check Valve
- * Pressure Relief Valve
- * Suction Filter)
- * Return Tube
Optional Parts/Components
- Direction control Valve / Solenoid Lowering Valve
- Flow Control Valve, Solenoid Bi Directional Valve and many more Valve including Pilot check Valve etc
General Specifications are
- Available Power source Rating and RPM
- 12 VDC : 800 W / 1600 W RPM 2800 RPM Duty Cycle 2 Min
24 VDC : 2000 W/3000W RPM 2800 RPM Duty Cycle 2 Min
24 VDC : 3000W RPM 2800 RPM Duty Cycle 12 Min
220V 1Ph and 440V 3Ph Duty Cycle 5 Minutes RPM 1440/2800 - Pressure: up to 180 Bar (up to 250 Bar on Demand)
- Flow Range: 1.6 - 4.0 CC
- Tank Capacity : 8 to 30 Liter







Compact Hydraulic Power Pack

AC Hydraulic Power Packs/
Car Lifts

AC Hydraulic Power Packs/
Industrial Lifts

Mounting Position/ Support

PMU (Pump Motor Unit)

DC Hydraulic Power Packs

Compact Hydraulic Power Pack -001
Motor 12/24VDC 1.6/2.2 KW
- Pump 2.0/3.0 CC (Flow 6LPM to 10 LPM)
- Basic Valves: Check Valve, Relief Valve, Flow Control Valve, weld neck
- Directional Control: Manual with Handle
- Tank: Horizontal or Vertical (Optional)
- Tank Capacity : 8-10 Lite
- Mounting Plate: Optional
- Remote and Battery Wire (Optional)
- Application: Stacker or Lift

Compact Hydraulic Power Pack -002
Motor 12VDC 1.2 KW
- Pump 1.0 CC (Flow 4LPM)
- Basic Valves: Check Valve, Relief Valve, Flow Control Valve, weld neck
- Directional Control: Solenoid
- Tank: Horizontal or Vertical (Optional)
- Tank Capacity :3 Litre
- Mounting Plate: Optional
- Remote and Battery Wire (Optional)
- Application: Multi Uses

Compact Hydraulic Power Pack -003
Motor 440 VAC 3Ph 2.2 KW 2800 RPM
- Pump /3.0 CC (10 LPM)
- Basic Valves: Check Valve, Relief Valve, Flow Control Valve, weld neck
- Directional Control: Solenoid Lowering Valve
- Tank: Horizontal
- Tank Capacity : 40 Liter
- Application: Scissor Lift or Good Lift

Compact Hydraulic Power Pack -004
Motor 220 VAC 2.0KW
- Pump 2.0/3.0 CC (Flow 6LPM to 10 LPM)
- Basic Valves: Check Valve, Relief Valve, Flow Control Valve, weld neck
- Directional Control: Manual with Handle
- Tank: Horizontal or Vertical (Optional)
- Tank Capacity : 8-10 Lite
- Mounting Plate: Optional
- Application: Stacker, Scissor Lift and Two Pole Lift

Compact Hydraulic Power Pack -004
Motor 12VDC 1.6 KW
- Pump 2.0 CC (Flow 6LPM)
- Basic Valves: Check Valve, Relief Valve, Flow Control Valve, weld neck
- Directional Control: Solenoid Lowering Valve
- Tank: Horizontal
- Tank Capacity : 15 Liter
- Mounting Plate: Optional
- Remote and Battery Wire (Optional)
- Application: Tipper and Hopper
We provide our compact power packs with appropriate tank and corresponding tank accessories. These are assembled by using various components and some of them are hydraulic gear pump, coupling, DC motor, check valve and pressure relief valve, Suction Filter, Return Lines etc. Some optional parts are also available such as Flow Regulator Valve, Pilot Operated check valve, Direction control Valve / Solenoid Lowering Valve etc. that are included in the packs according to the customers’ interests.
The components are defiant to corrosion and other hostile conditions that can halt or degrade their functioning. These are designed to keep working even in adverse conditions. The hydraulic pressure exercised by the oil (fluid) makes compact power packs to work. All the components used are quality tested and highly efficient. The compact power packs are characterized by a high extent of precision and have an extensive function range. These are employed in various industries. These are widely used in Material Handling Machines, Mini Tippers, Lifts, Tail Gate, Hospital Equipments, Ladders, Pickup Trucks, Mobile Winches, Car-carriers, Trucks and other comparable purposes.
The Dynamic Hydrofab compact power packs consume a reduced amount of power and are economical. These are easy to maintain. The noise produced by these power packs is reduced by special efforts so as to provide a friendly working environment. Our power packs are renowned for their efficiency and long working life in the market. To make sure that the client receives a fine product, various different tests on well-defined parameters are performed before supplying the product.
These power packs are compact in size, for very low operation time (1-2 minute max after an interval of 10 minute, S2 or S3 Duty Cycle)
-
Need Compact Hydraulic Power Pack? Provide Details:
- Working pressure?
- Max Flow?
- Max cycle Time? (Max up to 3-4 Minutes)